Header
Engineering

Roberts Swiss Inc. has an inventory of over 75 machines in 55,000 square foot total facilities. We maintain a mix of state of the art CNC (computer controlled) machines, and an extensive array of tried and true automatic swiss cam type machines.

SWISS CNC DEPARTMENT

(1) Star ST-38 with Automatic Bar Feeder
1.500" Dia. Max
(1) Star ECAS-32T with Automatic Bar Feeder
1.250" Dia. Max
(1) Star SR-32J with Automatic Bar Feeder
1.250" Dia. Max
(2) Star SW-20 with Automatic Bar Feeder
.750" Dia. Max
(1) Star SR-20RIV Type B (B-Axis) with Automatic Bar Feeder
.750" Dia. Max
(4) Star SR-20RIII with Automatic Bar Feeder
.750" Dia. Max
(1) Star SR-20RJ with Automatic Bar Feeder
.750" Dia. Max
(1) Star SR-10J with Automatic Bar Feeder
.400" Dia. Max
(2) Star SB-20E with Automatic Bar Feeder
.750" Dia. Max
(4) Star SB-20C with Automatic Bar Feeder
.750" Dia. Max
(2) Star SST-16 with Automatic Bar Feeder
.625" Dia. Max
(2) Star SA-16 with Automatic Bar Feeder
.625" Dia. Max
(3) Star SA-12 with Automatic Bar Feeder
.470" Dia. Max
(1) Star RNC-16II with Automatic Bar Feeder
.625" Dia. Max
(2) Star RNC-16 with Automatic Bar Feeder
.625" Dia. Max
 

STROHM/TORNOS MACHINE DEPARTMENT (BAR)

(19) Strohm 125 Automatic Swiss Cam Bar Feed
.500" Dia. Max
(4) Tornos 125 Automatic Swiss Cam Bar Feed
.500" Dia. Max
(2) Tornos M-7 Automatic Swiss Cam Bar Feed
.281" Dia. Max

ESCOMATIC MACHINE DEPARTMENT (COIL)

(2) Escomatic D-5 Automatic Swiss CNC Coil Feed
.157" Dia. Max
(5) Escomatic D-6 Automatic Swiss Cam Coil Feed
.250" Dia. Max
(20) Escomatic D-2 Automatic Swiss Cam Coil Feed
.1875" Dia. Max
(8) Escomatic D-4 Automatic Swiss Cam Coil Feed
.1875" Dia. Max

SECONDARY MACHINES

(1) Hardinge Chucker HC Lathe
(1) Hardinge DV-59 Lathe
(1) Hardinge Small Lathe
(1) Shaubling Lathe
(1) Bridgeport Mill
(3) Strohm Stop Spindle Secondary Set Up
(3) Baker Mills
(1) AccuTap
(3) Manual Deburring

Dimensional Capacities
.010 minimum to 1.500" maximum diameters.
.030 minimum to 24.0" maximum lengths.

Specialties
Close tolerances (down to .0003" on diameters). High micro finishes (32 micro on 303 S. S.). Long turned Shafts , Dowel Pins, Double Pointed Pins, Valve Stems and Terminal Pins.

Materials
Brass, Stainless Steel, Carbon Steel, Aluminum, Bronze, Phosphor Bronze, Copper, Nickel Silver, Delrin, Nylon, Teflon, Fiberglass and other plastics.

Order Quantities
Prototypes 1 piece to 1,000 pieces
Production 500 pieces to 1,000,000 +++ pieces

EQUIPMENT

© 2008 ROBERTS SWISS INC. ALL RIGHTS RESERVED.
Home | About | Equiment | Quality | Engineering | Sales | Contact
Roberts Swiss Inc. • 1387 W. Ardmore Avenue Itasca, IL 60143 • Tel: 630.467.9100, Fax: 630.467.9106